upgrading printer
Posted by Blisk
|
Re: upgrading printer October 03, 2018 10:24AM |
just looks like a cr10
have a bigger image (click on it, twice, to get full size)
there are lots of parts on aliexpress
not sure what gears your referring to...
its basically a vslot machine with rollers running on the vslots and belts in the slots.
In case you haven't heard of vslot
So its like tslot, but has a v groove to so its easy to use it as cheap linear rails
Edited 3 time(s). Last edit at 10/03/2018 10:34AM by Dust.
have a bigger image (click on it, twice, to get full size)
there are lots of parts on aliexpress
not sure what gears your referring to...
its basically a vslot machine with rollers running on the vslots and belts in the slots.
In case you haven't heard of vslot
So its like tslot, but has a v groove to so its easy to use it as cheap linear rails
Edited 3 time(s). Last edit at 10/03/2018 10:34AM by Dust.
|
Re: upgrading printer October 04, 2018 01:01PM |
It would be nice for you to tell us what printer
you are going to upgrade?
you are going to upgrade?
|
Re: upgrading printer October 06, 2018 05:24PM |
Keep this printer to print parts.
Build up another printer to meet all your requirements / desires
Sounds like you want MAJOR update!
You can get all the parts on eBay or other outlets.
Gears? Do you mean leadscrews to drive X?
The CR-10 variant you show uses timing belts on X, Y
and lead screw on Z.
Build up another printer to meet all your requirements / desires
Sounds like you want MAJOR update!
You can get all the parts on eBay or other outlets.
Gears? Do you mean leadscrews to drive X?
The CR-10 variant you show uses timing belts on X, Y
and lead screw on Z.
Sorry, only registered users may post in this forum.