Hello,
This is my hotend:
[
i.ytimg.com]
I'm using RAMPS 1.4 and this is my extruder motor:
[
g01.a.alicdn.com]
This is my configuration file:
[
pastebin.com]
Quote
configuration.h
#define DEFAULT_AXIS_STEPS_PER_UNIT {107.5,107.5,175.0,86.4}
#define DEFAULT_MAX_FEEDRATE {100, 100, 20, 205}
#define DEFAULT_MAX_ACCELERATION {100,100,100,100}
AXIS STEPS PER UNIT for extruder is 86.4 and when I press extrude 1000mm (1000mm/min) in pronterface I got exactly 1 meter extruded filament.
The problem is that when I push filament (by hand) on heated hotend It gets extruded but when It comes very slowly during printing it is filament doesn't come out from hotend. Any sugestions?
Videos for better understanding will be uploaded 24-08-2016 after 17:00 CEST
Thank you for help!