Welcome!
Log In
Create A New Profile
Home
>
Fabrication
>
Casting and Moldmaking Working Group
> Topic
Advanced
printing a mold cavity to make lost foam casting forms, or waxes
Posted by
trackVW
Forum List
Message List
New Topic
trackVW
printing a mold cavity to make lost foam casting forms, or waxes
November 14, 2014 01:39PM
Registered: 10 years ago
Posts: 4
Has anyone printed up a mold cavity that can then be filled with foam and used in the lost foam casting process ?
or for making waxs to use in lost wax castings
thanks for your ideas or direction
Reply
Quote
VDX
Re: printing a mold cavity to make lost foam casting forms, or waxes
November 14, 2014 05:14PM
Admin
Registered: 16 years ago
Posts: 13,888
... I've done something similar with a milled original form and a silicone mould for chocolate -- but this could be a printed object and the result from wax or foam too:
[
forums.reprap.org
]
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [
reprap.org
] -- Deutsche Facebook-Gruppe - [
www.facebook.com
]
Call for the project "garbage-free seas" - [
reprap.org
]
Reply
Quote
trackVW
Re: printing a mold cavity to make lost foam casting forms, or waxes
November 14, 2014 09:56PM
Registered: 10 years ago
Posts: 4
Well I could mill it to as I have a router head attachment for it
Reply
Quote
Newer Topic
Older Topic
Print View
RSS
Sorry, only registered users may post in this forum.
Click here to login