3D-printed plastic inserts for injection mouldung
Posted by VDX
|
3D-printed plastic inserts for injection mouldung November 24, 2019 01:10PM |
... "water-soluble" injection moulding inserts, made with an (actually pretty cheap) DLP-printer 
Edited 1 time(s). Last edit at 11/24/2019 01:10PM by VDX.
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]
Call for the project "garbage-free seas" - [reprap.org]
Edited 1 time(s). Last edit at 11/24/2019 01:10PM by VDX.
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]
Call for the project "garbage-free seas" - [reprap.org]
|
Re: 3D-printed plastic inserts for injection mouldung November 24, 2019 04:42PM |
... the "water soluble resin" needs more than 2 days to brake away, when done in the basement with 16 degC ambient temperature!
But now completely removed:
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]
Call for the project "garbage-free seas" - [reprap.org]
But now completely removed:
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]
Call for the project "garbage-free seas" - [reprap.org]
|
Re: 3D-printed plastic inserts for injection mouldung December 08, 2019 02:27AM |
... exactly! -- and a step more into DIY-hightech 
While I'm even doing "DIY-micro&nanotech" with some of my more sophisticated setups
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]
Call for the project "garbage-free seas" - [reprap.org]
While I'm even doing "DIY-micro&nanotech" with some of my more sophisticated setups
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]
Call for the project "garbage-free seas" - [reprap.org]
Sorry, only registered users may post in this forum.