Hello All,
I am trying to finish a Mendel I started 2 years ago. All mechanical construction except the extruder is finished. I got hung up on the Techzone Gen 3 electronics when I last put this project down 18 months ago. I'm having trouble finding where I'm supposed to plug various wires into (mechanical engineers don't like wires...) and I cant seem to find any good diagrams other than the main wiring schematic here: [
www.reprap.org]
This is helpful however it doesnt help me find where the smaller connectors such as D9 and D10 on the extruder controller. Basically, where can I find the diagram that tells me what D9 and D10 actually are on the board? Other than the main wiring diagram I have only tried to decipher the correct wiring from the handful of hi-res images here:[
www.reprap.org]
Also, the power supply that came with the kit doesnt appear to have come with a female port to connect it. Am i supposed to just cut the 12V output cable on the power supply and wire it in parallel to each of the 12V power inputs?
I apologize for all of the old newb questions from 2 years ago. I'm sure there will be more to come...
Thanks in advance!