Welcome! Log In Create A New Profile

Why the brim not same at right and left way

Posted by taratata

taratata

Why the brim not same at right and left way
April 23, 2016 11:14AM

Registered: 7 years ago
Posts: 85

Hi every one,

Sorry for my english
the brim at right way is perfect but at left not ...
for understand, i show you pictures is better

Brim_0.JPG

Brim_1.JPG

thank you for yours answers...

a+

Reply Quote

Bezdak821

Re: Why the brim not same at right and left way
May 04, 2016 01:02PM

Registered: 7 years ago
Posts: 4

It looks like your bed isn't leveled properly. The left side of the bed is probably too far from the nozzle

Reply Quote

Tinchus

Re: Why the brim not same at right and left way
May 06, 2016 09:18AM

Registered: 8 years ago
Posts: 155

Also make sure your hotend is properly assembled: check that the hotend is very straight mounted on the extruder.