How to choose wich face is down?
Posted by sweaving
|
How to choose wich face is down? February 24, 2010 08:07AM |
Registered: 13 years ago Posts: 60 |
Hi guys, i am fairly new to this, and have only just started messing about with Skienforge, and the Reprap software. Now in the Reprap software i am able to rotate the model and choose its orientation before i post the Gcode, can this also be done in Skienforge? as i have some models that should be in a different orientation when posting the Gcode.
Thanks.
Steve
Thanks.
Steve
|
Re: How to choose wich face is down? February 24, 2010 08:17AM |
Admin Registered: 16 years ago Posts: 13,790 |
Hi Steve,
... you have to adjust the orientation of your model in a CAD-program ...
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]
Call for the project "garbage-free seas" - [reprap.org]
... you have to adjust the orientation of your model in a CAD-program ...
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]
Call for the project "garbage-free seas" - [reprap.org]
|
Re: How to choose wich face is down? February 24, 2010 10:32AM |
Registered: 16 years ago Posts: 106 |
|
Re: How to choose wich face is down? February 24, 2010 01:09PM |
Registered: 13 years ago Posts: 60 |
|
Re: How to choose wich face is down? February 24, 2010 02:45PM |
Registered: 14 years ago Posts: 573 |
sweaving Wrote:
-------------------------------------------------------
> thats a pain in the rear, but thanks for the
> advice and the link to the other thread. The
> meshlab work around seams todo the job..
>
> Steve
Try Netfabb to compare them for your taste.
It is believed to be much better.
(I have nit tried meshlab yet)
-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+
-------------------------------------------------------
> thats a pain in the rear, but thanks for the
> advice and the link to the other thread. The
> meshlab work around seams todo the job..
>
> Steve
Try Netfabb to compare them for your taste.
It is believed to be much better.
(I have nit tried meshlab yet)
-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+
|
Re: How to choose wich face is down? February 24, 2010 03:47PM |
Registered: 13 years ago Posts: 60 |
|
Re: How to choose wich face is down? February 24, 2010 03:51PM |
Registered: 14 years ago Posts: 573 |
sweaving Wrote:
-------------------------------------------------------
> gotta admit the align Z feature in net fab is very
> easy to use!Good call with this bit of software.
>
> Steve
I´m more for the automatic and manual repair-functions.
-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+
-------------------------------------------------------
> gotta admit the align Z feature in net fab is very
> easy to use!Good call with this bit of software.
>
> Steve
I´m more for the automatic and manual repair-functions.
-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+
|
Re: How to choose wich face is down? February 25, 2010 06:43AM |
Registered: 13 years ago Posts: 34 |
If you have a mac pleasant3D is the way to go for orientation and centering.
B^2 : [replibot.blogspot.com]
~~ We Are The Factory ~~
B^2 : [replibot.blogspot.com]
~~ We Are The Factory ~~
Sorry, only registered users may post in this forum.