Hi here is the specs of the stepper motor. can you please inform me about if it works with sanguinolulu. I have tested the motor with board but stepper drivers are getting too hot. I am afraid of destroying drivers.

Thanks

MOTORES PASO A PASO

MARCA MINEBEA Co. Ltd - ASTROSYN

STEPPING MOTOR

TYPE 23LM-C355-P6V

BIPOLAR

RATED CURRENT/WDG 1,5 Amps

WINDING RESISTANCE 2,2 Ohms

HOLDING TORQUE Nm (Kg-Cm) 0,614 (6,2)

INDUCTANCE 5,5 mH

ROTOR INERTIA 0,110 Kg-Cm2

DETENT TORQUE Nm (g-Cm) 0,0540 (550)

WEIGHT 450 grs.

2.1 V

COIL 1.4 Ohms

1.8 Deg/Step

If your steppers drivers are too hot, put on heat sinks, and turn down the current