I got some unoccupied printer time.

Hey, I´m done printing and selling my first mendel set.
Does anyone have something technically interesting to
be printed?
I´m shipping from Germany and am using white ABS on a RepMan.


Marcus

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

Nothing technical interesting, I just have the need for a set of Mendel parts at Munich (I already have collected all other mechanical parts and the electronics).

Treichl Wrote:
-------------------------------------------------------
> Nothing technical interesting, I just have the
> need for a set of Mendel parts at Munich (I
> already have collected all other mechanical parts
> and the electronics).


Sorry, you are talking about 100+ hours or printing here.
I just finished that and I´m not looking forward to another
2 sleepless weeks. Not for another few weeks at least.

I will print a second set some day but not now. Sorry.

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

I can print much faster now and am offering Mendel/MiniMendel Parts and Sets again.

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

What would the cost be for a set of Mendel parts to be shipped to the US? I can PM you my address if you would like. I've been searching for a set but without any luck and any help I could get would be greatly appreciated. Thanks!

My email-address is Marcus@Wolschon.biz and I´m currently on vacation
until monday.
I´ll get back to you monday or tuesday, when I´m back home.

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

I will be in Berlin at the end of July for an MFA residency. Eventually, I would like to get a kit, but for now, I need a custom headset printed. It is kind of like a visor, with a place for a camera, headphones, and circuit boards. I have not created a model for it yet, but you can find a crappy sketch here, to give a basic idea of the shape.

[snowshoedetroit.com]

It will be very thin, with lots of little cubbies to fit specific parts into.

If this sounds interesting to you let me know.

Thanks
dan

What´s the total size of the largest part?
The printer is 280x280mm so if I get the second heated bed
extremely flat I may do parts like 250x250mm total (that would
be very hard to remove from the metal due to the large contact area)

---

-------------------------------------------
* homeprototype free 3d design repository
* Blog
* Google+

i have a difficult design that is a rather large part as well. it is a CO2 dragster, it has multiple slots/holes/curves/etc. it has maximum dimensions of ~10.35x1.63x1.88. is this part able to be made on a reprap? i was interested in building my own but time and money sliped away from me. can this part be made?

It would help if you included units.
I ASS-U-ME that you are using inches.
Printing it as one piece would require lots of support material.
It looks like this could be broken into 5 or 6 pieces that could be printed with little or no support material.
This size would fit on a Mendel.

---

Bob Morrison
Wörth am Rhein, Germany
"Luke, use the source!"
BLOG - PHOTOS - Thingiverse