Hello fellow RepRappers,

I'm Hubert, and I want to build a Kossel; it's as simple as that.
A Kossel is the successor of the ingenious Rostock delta-printer by mr. Rocholl, using OpenBeam instead of rods for the delta-system.
As we all know, a RepRap printer is built using parts printed by another 3D-printer, but I unfortunately don't know anybody with a 3D-printer, so I hope somebody (preferably in The Netherlands, or nearby The Netherlands, because of shipping costs) is friendly enough to help me out and print the needed parts for this wonderful printer-design.
You can download the parts from the Kossel's GitHub, at https://github.com/jcrocholl/kossel.

Hubert.

I could do it but you'd have to do some work first : decide which parts needs to be printed and generate the needed STLs yourself.

It's important you get to know your machine before mounting it - and I don't have enough time to do that for you.

Edit : oh BTW I'm in France so shipping shouldn't get too high.

Contact me via PM to arrange details if you're interested.

Edited 1 time(s). Last edit at 11/30/2012 05:53AM by DeuxVis.

---

Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.

I am able to print the set for you we can talk over pm

It is already solved! :-)