Welcome! Log In Create A New Profile

Church Bell in frame

leadinglights

Church Bell in frame
March 26, 2014 01:03PM

Registered: 15 years ago
Posts: 1,475

Possibly of interest as it is made from many small parts printed in PLA glued together with Bostik Extrufix - this not only gives a strong joint, but used sparingly also increases the interlamination bond of PLA very substantially.

Rendered CAD

Bell_with_Frame.jpg

Photo

20140326_102556.jpg

More on [www.thingiverse.com]

Mike

Reply Quote

Garry Bartsch

Re: Church Bell in frame
April 01, 2014 10:32PM

Registered: 13 years ago
Posts: 363

Nice job!

Reply Quote

valimai

Re: Church Bell in frame
April 02, 2014 03:09AM

Registered: 12 years ago
Posts: 14

It's very beautiful.

Reply Quote

Bill Clark

Re: Church Bell in frame
April 08, 2014 07:30PM

Registered: 12 years ago
Posts: 241

What machine and layer height are you using?

Reply Quote

leadinglights

Re: Church Bell in frame
April 13, 2014 07:28AM

Registered: 15 years ago
Posts: 1,475

Hi Bill,

It is printed on a Rostock. Print is in natural PLA at 0.25mm layer height and 20% infill

Mike

Reply Quote

Steve_Criz

Re: Church Bell in frame
April 18, 2014 02:14AM

Registered: 12 years ago
Posts: 12

They must be some amazingly small bolts Mike!!

An awesome print by the looks of it.

Have you rung it?

Keep on producing the good stuff!!

Steve.

Reply Quote

leadinglights

Re: Church Bell in frame
April 20, 2014 01:41PM

Registered: 15 years ago
Posts: 1,475

It swings well and the stay and slider mechanism works so that it will rest in the up position both ways, but I can't say I have rung it, as it goes sort of "clik clok" instead of "ding dong"

Mike