Axis alignment test cube
Posted by the_digital_dentist
|
Axis alignment test cube July 18, 2015 11:39AM |
For aligning axes in cartesian machines: https://www.youmagine.com/designs/alignment-and-calibration-cube
Measure diagonals in each plane- XY, XZ, and YZ to check orthogonality of axes.
There's a spreadsheet that calculates the error angle and required correction.
You can also use it to calibrate steps/mm in all three axes.
Measure diagonals in each plane- XY, XZ, and YZ to check orthogonality of axes.
There's a spreadsheet that calculates the error angle and required correction.
You can also use it to calibrate steps/mm in all three axes.
Sorry, only registered users may post in this forum.