[worldwide] printed parts, extruder drives, hobbed bolts, hardware kits, ...

Hello everyone!

Take a look at my listings at eMAKERshop (http://www.emakershop.com/Seller=2273)! From now very low shipping rates!

I offer there:
- printed parts for: RepRapPro Huxley (original or LM6UU-x-ends), Prusa i2, RepRapPro Mono Mendel, RepRapPro Tricolour Mendel, Mini Prusa i3
- different extruder drives (printed parts)
- complete hardware-kits for Huxley printers
- hobbed bolts M6, M8 and for MiniExtruders
- heatsink-sets
- crimp connectors for steppers / endstops / thermistors
- igus clip-type plain bushings (6mm & 8mm)
- igus linear bearings (6mm)

Happy shopping!

Best wishes
3D Andy

Hello everyone!

Prusa i2 printed parts sets are available again!
Also on sale: printed parts set "FoldaRap".

Happy printing!
3D Andy
http://www.emakershop.com/Seller=2273

Hi everyone,

I have put some pictures of my printed parts online. In full resolution - so you can see the quality of the prints. Just have a look at http://www.flickr.com/photos/3d_andy/sets/72157636249492735/

Best wishes
3D Andy

Hi everyone!

Good news: "Tricolour Mendel", "Prusa i2" and "Huxley LM6UU" printed parts sets are ready for shipping again!
Also available: RepRapPro-Style extruder drives for Nema14 or Nema17 stepper motors - also with complete hardware!

Take a look at: http://www.emakershop.com/Seller=2273

Best wishes
3D Andy

Ready for shipping: a new batch of hobbed bolts for MiniExtruder / RepRapPro-Extruders!

If you need some special printed parts (for example for a printer-type not listed on emakershop) - please drop a short message to me!

Take a look at: http://www.emakershop.com/Seller=2273

Thank you very much and best wishes
3D Andy

Andy, this forum is for printed parts only.

All your vitamins - hobbed bolts, motors, etc - sales should be listed there only : [forums.reprap.org]

Or as an alternative if you want to keep a single thread for convenience, put in in the generic "for sale" forum.

Thanks !

---

Most of my technical comments should be correct, but is THIS one ?
Anyway, as a rule of thumb, always double check what people write.

Thank you for this hint :-)

I will just offer printed parts in this forum from now on! If anyone needs something else: please take a look at: http://forums.reprap.org/read.php?179,313922.

Best wishes
3D Andy

Check out my lowered prices for printed parts sets!!!

Thank you for your visit at http://www.emakershop.com/Seller=2273

Best wishes and happy printing
3D Andy

Hello!

Just want to inform you: now also available: Cyclon PCB Factory printed parts set. Take a look at emakershop or drop a PM!

Thanks!
3D Andy