[US] MakerBot printed Mini Mendel Set (83 pieces)
Posted by JohnA
|
[US] MakerBot printed Mini Mendel Set (83 pieces) June 02, 2010 11:09PM |
Listed tonight on eBay:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=250644061394
Printed on MakerBot #1136 and #1290. All of the large pieces were printed on a heated build platform and have minimal (if any) warping.
Large shot of some of the other included pieces: http://i.imgur.com/Hv23d.jpg
Total set is 83 parts, printed from the SVN repo. Parts were cleaned up lightly, but will require some fitting and lots of chasing holes with a drill.
Some other misc photos from printing the parts are on my Flickr as well: [www.flickr.com]
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=250644061394
Printed on MakerBot #1136 and #1290. All of the large pieces were printed on a heated build platform and have minimal (if any) warping.
Large shot of some of the other included pieces: http://i.imgur.com/Hv23d.jpg
Total set is 83 parts, printed from the SVN repo. Parts were cleaned up lightly, but will require some fitting and lots of chasing holes with a drill.
Some other misc photos from printing the parts are on my Flickr as well: [www.flickr.com]
Sorry, only registered users may post in this forum.