[AU] Prusa Mendel Printed Parts [SOLD]
January 17, 2011 05:59AM
For Sale:

A complete set of Prusa Mendel printed parts printed in Black and Green PLA. Pulleys printed with 0.25mm layers. All other parts printed with 0.4mm layers.



All good clean prints. For a detailed set of pictures, refer to my page on the wiki: [reprap.org]

The parts pictured on the Wiki will are the ones you are buying.

Price: $130AU + postage

I will print your extruder of choice for an additional $10.

I am frequently in #reprap for support if required. PM me if you are interested.

Edited 2 time(s). Last edit at 01/23/2011 09:05PM by Greg Frost.
Re: [AU] Prusa Mendel Printed Parts
January 17, 2011 06:23AM
Looks nice, shame that shipping from AU to CZ would cost me fortune :-(
Re: [AU] Prusa Mendel Printed Parts
January 17, 2011 07:44AM
500-1000g parcel to:
Australia express post satchel= $11.70

International Examples:

500-750g parcel to:
cz = $27.25 air mail $15.35 sea mail
us= $21.85 air mail $15.35 sea mail
malaysia=$18.40 air mail

although I would suggest they get it from you in cz prusajr!

Edited 1 time(s). Last edit at 01/17/2011 07:45AM by Greg Frost.
Re: [AU] Prusa Mendel Printed Parts
January 23, 2011 09:05PM
SOLD with extruder option
Re: [AU] Prusa Mendel Printed Parts [SOLD]
February 01, 2011 01:56AM
Are you planning to print any more parts? Looking to set a reprap up when I move in 3 weeks smiling smiley
Cheers
Cody
Re: [AU] Prusa Mendel Printed Parts
February 01, 2011 04:17AM
I received the parts today, and they look really nice. Thanks Greg.
Re: [AU] Prusa Mendel Printed Parts [SOLD]
February 02, 2011 02:28AM
Yes I'm planning on printing more. In fact I have sold 3 more sets (two of which I still need to print the extruders for). The other 3 I just sold to people asking about it in #reprap.
Re: [AU] Prusa Mendel Printed Parts [SOLD]
February 03, 2011 07:00AM
Ahh cool. So if I contact you when I'm ready we can arrange something?
Re: [AU] Prusa Mendel Printed Parts [SOLD]
February 04, 2011 09:40PM
Sure
Re: [AU] Prusa Mendel Printed Parts [SOLD]
July 14, 2011 01:13AM
Hi

I'm after a set of mendel parts, not prusa mendel.

I'm in sydney, could you do this and post?

Thanks

Josh
Re: [AU] Prusa Mendel Printed Parts [SOLD]
July 14, 2011 04:29PM
PM Sent.
Re: [AU] Prusa Mendel Printed Parts [SOLD]
August 22, 2011 10:44PM
Hi Greg,

Are you still making these sets of printed parts with extruders?

Regards,

Linse
Re: [AU] Prusa Mendel Printed Parts [SOLD]
August 23, 2011 10:46AM
I am. I printed this plate recently. It took 17.8 hours:


Re: [AU] Prusa Mendel Printed Parts [SOLD]
August 23, 2011 05:01PM
PM Sent
Re: [AU] Prusa Mendel Printed Parts [SOLD]
November 18, 2011 07:40PM
You still selling printed parts kit mate?

Any chance of a Metro Melbourne delivery before chrissy? As far as the extruder is concerned, what would be your recommendation? Greg Frost's accessible Wade Extruder seems to be a reasonably popular choice, do you have a preference? Cheers!
Re: [AU] Prusa Mendel Printed Parts [SOLD]
September 05, 2013 11:27AM
Hi Greg,

One question on your set.

I'm 95% settled on the Prusa Mendel as our first build. One major criteria is the completeness of documentation. We found a compile by Gary, for reference, you can see it here:

[garyhodgson.com]

As far as acquiring HW parts, online sources mostly point to the LM8UU model. Such as this on on ebay today:
[www.ebay.com]

I'm not exactly up to date with all the iterations and mods; but I know it's not the one described in Gary's doc.

The closest thing I found on the net is right here at this post . However, there is one question remain:

The 12 PLA Bushings as mentioned on page 4 of Gary's doc do not show themselves to me obviously on the photo.

Q: If I am wrong, and the 12 PLA Bushings are somewhere in the photo, could you please point them out to me, and give me the estimate cost including shipping to California, USA? Otherwise, can you add them on?

Right now we want to get our first build as quickly as we can, so latest design is not an issue. We're quite happy with the one described in Gary's doc.

Thank you

Charles
Re: [AU] Prusa Mendel Printed Parts [SOLD]
September 06, 2013 08:44AM
This is a very old post that you have responded to. These parts are a very early prusa 1 version.
I really think you would be better going with a more up to date set of parts. I certainly don't have the sources anymore for such an old set.
You should still be able to follow Gary's instructions with a prusa2 set of parts.
Re: [AU] Prusa Mendel Printed Parts [SOLD]
September 06, 2013 10:19AM
Oh, well, I'll try again. Thanks anyway...
Sorry, only registered users may post in this forum.

Click here to login