Welcome! Log In Create A New Profile

SeeMeCNC Rostock Max V2 kit.

mrchris97

SeeMeCNC Rostock Max V2 kit.
January 04, 2015 02:16AM

Registered: 9 years ago
Posts: 12

Hi all,
I'm thinking of buying one of seemecnc's rostock kits. How were your experiences with the kit and do they run smoothly once built? Do they need any mods? Overall, would you recommend this kit? I currently have a Cartesian printer and am interested in building a delta printer.
Thanks!

Reply Quote

3DRapidClone

Re: SeeMeCNC Rostock Max V2 kit.
January 04, 2015 12:18PM

Registered: 10 years ago
Posts: 140

They require tweaking to print well. Once you fine tune it, they print extremely well. Id get stepper dampners for sure. There are ezstruder mods so that you can print ninjaflex as well.

Reply Quote

dclarkm

Re: SeeMeCNC Rostock Max V2 kit.
January 06, 2015 12:16PM

Registered: 9 years ago
Posts: 44

Very interested in any feedback anyone has to offer on this kit. I recently purchased a mini-kossel kit from another vendor and am very close to returning it for a refund. Lots of misrepresentation on what I would get and what I actually got....far too much money for disappointment. That's another story.

Reply Quote

Precision

Re: SeeMeCNC Rostock Max V2 kit.
January 06, 2015 12:52PM

Registered: 9 years ago
Posts: 1

My only comment is they offer an excellent support forum and good documentation for your build.

I personally purchased their Orion delta which is premade because I needed instant gratification.
Solid design and I already modified mine with a E3D V6 hot end.

If I were to do it over and had the weekend for a build project I would have no problem buying their kit for a bigger unit.

Reply Quote

rpress

Re: SeeMeCNC Rostock Max V2 kit.
January 06, 2015 08:21PM

Registered: 9 years ago
Posts: 14

I bought one as my first 3D printer. It's a good all-around kit, I have no regrets. I'd say the two must have upgrades are stepper dampers and carbon arms. I've done some other upgrades shown here: [forum.seemecnc.com]