Welcome! Log In Create A New Profile


3dr - print issues

Posted by bromon 
3dr - print issues
February 14, 2015 12:27AM
I have built, calibrated, but when printing a 20x20 cube, as it moves up the z axis, It is almost moving exactly 5mm in the 2 oclock position. I've attached a photo, just am running out of ideas....

Using Marlin (https://github.com/RichRap/MARLIN_FIRMWARE_for_3DR_V2) , repetier V1.0.6 & slic3r 1.1.7

open | download - 20150213_214752.jpg (150.5 KB)
Re: 3dr - print issues
February 14, 2015 04:52AM
It appears your stepper motors are skipping.
Re: 3dr - print issues
February 17, 2015 06:06PM
reduce print speed. take it down to 20-30mm/s and see where that leads you. Also are your pulleys turning on the motor shafts? I had a similar issue with mine and I had to key the shafts to get the pulleys to stop skipping.

My Personal Blog. Build blog.

Modicum V1 sold on e-bay user jaguarking11
Sorry, only registered users may post in this forum.

Click here to login