Marlin or Repetier Firmware For My Delta? May 19, 2015 10:41AM |
Registered: 9 years ago Posts: 44 |
Re: Marlin or Repetier Firmware For My Delta? May 20, 2015 05:26PM |
Registered: 9 years ago Posts: 569 |
Re: Marlin or Repetier Firmware For My Delta? May 20, 2015 06:02PM |
Registered: 10 years ago Posts: 140 |
Re: Marlin or Repetier Firmware For My Delta? May 21, 2015 02:11PM |
Registered: 8 years ago Posts: 8 |
Re: Marlin or Repetier Firmware For My Delta? May 21, 2015 07:01PM |
Registered: 10 years ago Posts: 903 |
Re: Marlin or Repetier Firmware For My Delta? May 22, 2015 02:06AM |
Registered: 9 years ago Posts: 1,159 |
Re: Marlin or Repetier Firmware For My Delta? May 22, 2015 06:48AM |
Registered: 10 years ago Posts: 903 |
Quote
dougal1957
Quote
vreihen
You should use Smoothieware and M665/M666, which blows the EPROM calibration away in terms of simplicity.....
What you mean that Smoothieware is available for the Mega2560/Ramps combo now must check that out.
Doug
Re: Marlin or Repetier Firmware For My Delta? May 22, 2015 10:43AM |
Registered: 9 years ago Posts: 1,159 |
Quote
vreihen
Quote
dougal1957
Quote
vreihen
You should use Smoothieware and M665/M666, which blows the EPROM calibration away in terms of simplicity.....
What you mean that Smoothieware is available for the Mega2560/Ramps combo now must check that out.
Doug
Sorry, it can NEVER run on such limited hardware. I just meant that M665/M666 is a much simpler way to change/save the settings than the clunky Repetier EPROM settings (which I have used in the past). I don't follow Marlin, but thought that I remember seeing that M665/M666 were supported in one or more forks?????
Re: Marlin or Repetier Firmware For My Delta? May 23, 2015 12:23AM |
Registered: 9 years ago Posts: 58 |
Quote
vreihen
Sorry, it can NEVER run on such limited hardware. I just meant that M665/M666 is a much simpler way to change/save the settings than the clunky Repetier EPROM settings (which I have used in the past). I don't follow Marlin, but thought that I remember seeing that M665/M666 were supported in one or more forks?????
Re: Marlin or Repetier Firmware For My Delta? May 23, 2015 04:06AM |
Registered: 10 years ago Posts: 140 |
Quote
BlasphemousBits
Correct me if I'm wrong, but I thought the latest Repetier firmware had support for auto-calibration? (see this page: [www.repetier.com]).
Is that different from the auto-calibration in Marlin?
I haven't tried Marlin yet, but the Repetier host interface for editing the EEPROM values on Repetier firmware is a godsend for calibration. It's tedious enough just changing firmware values, if I had to edit configuration.h and re-upload the firmware everytime I would have checked the whole printer out the window by now. :-)
Re: Marlin or Repetier Firmware For My Delta? May 23, 2015 04:54AM |
Registered: 10 years ago Posts: 14,672 |
Quote
3DRapidClone
The Duet platform has like one guy (dc42) working on it on his free time, and is nice for its quick and powerful calibration, ...
Re: Marlin or Repetier Firmware For My Delta? May 23, 2015 05:46PM |
Registered: 8 years ago Posts: 1 |