First Print! Thank You Everyone, Zulance

Thought Id share my first print with you. Even my calibration test came out excellent. Three of the four walls were exactly .45mm as they should of been, but the last wall was .4mm. I am not going to lose sleep over a .05mm difference on one wall. I will work on fixing that when im not printing for my kids.

My kids love Yu-gi-oh so I had to make them all a millennium puzzle of every color. Here is one made of blue, one of my hardest colors to print in because of the poor quality of the filament. My good quality filament is even better print quality.

Thank you everyone for your help in getting my machines firmware up and running.

Grats on the print

Take the calibration acceptable. you would deteriorate if try to resolve 0.05mm issue