What model is this?

mugen3Der

What model is this?
December 25, 2015 03:09PM

Registered: 10 years ago
Posts: 8

So I bought this Sunhokey 3D delta printer kit from China. It doesn't come with a part list nor an assembly guide, and I am a noob on building 3D printer. I was assuming the model is based on Kossel or Kossel mini, but when I follow their assembly guides I couldn't find the corresponding parts. So I got this part shown in picture, I am guessing it's a carriage for the belt. Am I right? But the kit doesn't come with MGN12-1H-L400 Linear Rail, I am guessing they missed it? Or this model might not need the linear rail?

Edited 1 time(s). Last edit at 12/25/2015 03:29PM by mugen3Der.

Reply Quote

Attachments:
open | download - P_20151225_115633.jpg (105.2 KB)

xile6

Re: What model is this?
December 25, 2015 04:04PM

Registered: 11 years ago
Posts: 197

That is the belt part.
You will need a xyz carriage.
If you go to thingivers you will find some, but not much of a help to you if you dont have a working printer.

But post a full pix of all the parts you have and maybe so one will be able to point out what part os what.

Reply Quote

mugen3Der

Re: What model is this?
December 25, 2015 04:10PM

Registered: 10 years ago
Posts: 8

I found this piece in the kit.

OEFOgp4.jpg

So it seems to me this model doesn't need the linear rail, but I don't find any wheels for this guy.

Reply Quote

mugen3Der

Re: What model is this?
December 25, 2015 04:18PM

Registered: 10 years ago
Posts: 8

Quote
xile6
That is the belt part.
You will need a xyz carriage.
If you go to thingivers you will find some, but not much of a help to you if you dont have a working printer.

But post a full pix of all the parts you have and maybe so one will be able to point out what part os what.

Thanks.

Table right

p5KHfFp.jpg

Table mid

Hvegw7I.jpg

Table left

IHuUDGd.jpg

Reply Quote

xile6

Re: What model is this?
December 25, 2015 04:56PM

Registered: 11 years ago
Posts: 197

Quote
mugen3Der
I found this piece in the kit.

OEFOgp4.jpg

So it seems to me this model doesn't need the linear rail, but I don't find any wheels for this guy.

Thats a printed slider carriage. In the photo it looks losse.
I never used them before, but they should be tight around the extruded metal part

*edit
Looks like there is a screw that goes into the side for tension, but not sure on thoe pix.
But you might be able to google the name and find an install.

Edited 1 time(s). Last edit at 12/25/2015 05:04PM by xile6.

Reply Quote

mugen3Der

Re: What model is this?
December 25, 2015 05:49PM

Registered: 10 years ago
Posts: 8

Quote
xile6
*edit
Looks like there is a screw that goes into the side for tension, but not sure on thoe pix.
But you might be able to google the name and find an install.

Here's the detailed pictures:

front

obesB5g.jpg

top

OQGMbsX.jpg

left

jwytUaG.jpg

I am guessing screws go through the large holes, and wheels or some sort will go through them.

Reply Quote

mugen3Der

Re: What model is this?
December 26, 2015 01:36AM

Registered: 10 years ago
Posts: 8

So I finally got some documents on building it, but it doesn't have too much explanation.
This is the picture in the document:

1ZC4kcO.jpg

So it's sort of like I thought how it should be assembled. Unfortunately, they sent me the wrong bearings, flanged ones.

0Yi7ljI.jpg

Anyone knows where to get bearings quick? I am based in SF bay area.

Edited 1 time(s). Last edit at 12/26/2015 12:03PM by mugen3Der.

Reply Quote

o_lampe

Re: What model is this?
December 26, 2015 02:54AM

Registered: 11 years ago
Posts: 5,232

Maybe the flanges should be aligned with the slot edges?

Reply Quote

xile6

Re: What model is this?
December 26, 2015 10:44AM

Registered: 11 years ago
Posts: 197

How many flange ones you got.

The top frame uses 6 bearing for the belt.
If you have more then 6, then they might have sent the wrong bearings.
If you have only 6, then they didnt seen you any bearings.

Reply Quote

mugen3Der

Re: What model is this?
December 26, 2015 12:04PM

Registered: 10 years ago
Posts: 8

Quote
o_lampe
Maybe the flanges should be aligned with the slot edges?

I was trying to make that work, but the provided screws are too short for that.

Reply Quote

mugen3Der

Re: What model is this?
December 26, 2015 12:04PM

Registered: 10 years ago
Posts: 8

Quote
xile6
How many flange ones you got.

The top frame uses 6 bearing for the belt.
If you have more then 6, then they might have sent the wrong bearings.
If you have only 6, then they didnt seen you any bearings.

So I got 4 ball bearings, and missing 14. All the rest I got are flanged ones.

Reply Quote

Magicmushroom666

Re: What model is this?
January 03, 2016 05:57AM

Registered: 10 years ago
Posts: 1

Are you sure the flange doesn't go the other way to how you have it mounted? so that it guides along the outside of the extrusion? I'd try all combinations etc first before deciding its the wrong part.

Reply Quote