Kossel "semi-auto" calibration with(-out) RRFW January 19, 2016 01:14PM |
Registered: 8 years ago Posts: 20 |
Re: Kossel "semi-auto" calibration with(-out) RRFW January 21, 2016 09:50AM |
Registered: 8 years ago Posts: 3,525 |
Re: Kossel "semi-auto" calibration with(-out) RRFW January 21, 2016 03:18PM |
Registered: 10 years ago Posts: 14,672 |
Quote
DjDemonD
I am firmly in favour of the FSR bed probing system for deltas. ([www.ultibots.com]). Probing both at and with the nozzle itself removes many irritating features of any offset probe such as reflectivity, ambient light, and the offset itself which means you can never fully probe the entire bed surface adequately. I have not encountered any issues with heat but then I mainly use my delta for PLA printing as it is not enclosed.
Re: Kossel "semi-auto" calibration with(-out) RRFW January 21, 2016 04:34PM |
Registered: 12 years ago Posts: 153 |
Quote
Whatever the cause, in RepRapFirmware you can measure the trigger height at each probe point and correct for it in the bed.g file. Tedious, but it works.
Re: Kossel "semi-auto" calibration with(-out) RRFW January 21, 2016 05:28PM |
Registered: 10 years ago Posts: 14,672 |
Re: Kossel "semi-auto" calibration with(-out) RRFW January 22, 2016 02:08PM |
Registered: 12 years ago Posts: 153 |