My dumb PCB effector

kasom

My dumb PCB effector
August 09, 2017 05:00AM

Registered: 10 years ago
Posts: 31

This is my version of PCB effector and carriage, inspired by dc42's PCB effector. The differences are:

- Bare PCB, without any electronics.
- M4 holes for the magnetic balls instead of M3.
- 60mm arm space.
- 2mm thickness

To create the PCB, use the attached dxf files to define the PCBs' outline.

PS: I made some mistakes in putting the axis' label in the wrong location, so it's definitely a dumb (as me, the owner) PCB effector.

pcb1.jpg

pcb2.jpg

Reply Quote

Attachments:
open | download - carriage60mm.dxf (93.5 KB)
open | download - effector60mm.dxf (94.6 KB)

kasom

Re: My dumb PCB effector
August 09, 2017 05:11AM

Registered: 10 years ago
Posts: 31

To mount the 3 color diamond hot-end, I use a modified Kharar's cooler's shield from Thingiverse. I'll put the modified version to Thingiverse later.

diamond1.jpg

diamond2.jpg

diamond3.jpg

Reply Quote

kasom

Re: My dumb PCB effector
August 09, 2017 05:21AM

Registered: 10 years ago
Posts: 31

To mount the E3D v6 or clone's groove mount, use 3 PCBs stacking in the different angles. It's a tight fit.

groove1.jpg

groove2.jpg

groove3.jpg

Reply Quote

dc42

Re: My dumb PCB effector
August 09, 2017 05:34AM

Registered: 10 years ago
Posts: 14,684

Looks good! I've been wondering how a Diamond can be mounted on the effector of a delta, and that looks like a good solution.

Do the heatsinks foul the rods in certain effector positions? If so, would it be better or worse if you rotate the Diamond through 60 degrees by re-drilling the 3 mounting holes?

Large delta printer [miscsolutions.wordpress.com], E3D tool changer, Robotdigg SCARA printer, Crane Quad and Ormerod

Disclosure: I design Duet electronics and work on RepRapFirmware, [duet3d.com].

Reply Quote

kasom

Re: My dumb PCB effector
August 09, 2017 05:57AM

Registered: 10 years ago
Posts: 31

Quote
dc42
Do the heatsinks foul the rods in certain effector positions? If so, would it be better or worse if you rotate the Diamond through 60 degrees by re-drilling the 3 mounting holes?

It's close to. I think you're right, I should have rotated the mounting holes, or at least put 3 more holes as an alternative.

Reply Quote

titeuf007

Re: My dumb PCB effector
August 09, 2017 08:00AM

Registered: 7 years ago
Posts: 232

could you lists all parts to build one?
it s hard to find ball magnetic
what is the id/od diam of you rod? do you share the file for you blue part where magnet is inside?
dc42 design is really great!

Reply Quote

kasom

Re: My dumb PCB effector
August 09, 2017 09:18AM

Registered: 10 years ago
Posts: 31

I'm using RobotDigg's carbon tube. 450mm/5mm/8mm.

Magnetics + balls from 3D_HOME/AliExpress. They have M4 hole, so you'll need 12 x M4 screws (I forgot the length, will check tomorrow) + 12 x M4 nyloc nut nuts.

The magnetic mount: rod-end.scad

The PCBs were made by EasyEDA by importing the DXF files to their PCB edtior to define the border outline. Texts and graphics were added using the editor.

Hope this helps.