Hello ,
So the Titel says it all. My Anycubic Kossel Delta Printer keeps Crashing in my Drive Belts while Printing and Probing.
I am using an anycubic kossel with an skr. 1.4 Turbo Mainboard and 2208 TMC Stepper Drivers.
With a PROBING_MARGIN of 50 it stops crashing while Probing but then Printing it still Crashes,
and Changing the DELTA_PRINTABLE_RADIUS and the DELTA_RADIUS not seems to change anything.
So i am again in search for some help.
I attached my Config File to this Post.