Simple Dispenser
Posted by VDX
|
Simple Dispenser November 25, 2008 02:43PM |
Hi all,
here i'll post some images and progress when building some paste-dispensers of different size and later some fabbing-samples ...
First the images of pre-assembling a 'mini'-dispenser with a 5ml-cartouche
1. - all parts:
2. - pre-assembled an in 'load'-position:
3. - 'empty'-position:
Next i'll complete this type with a fixing-clamp for the cartouche, make some testt and build a second bigger one for 50ml-cartouches ...
The parts are easy enough to reprap them, so everyone is encouraged to make his/her own or develop better concepts ...
Viktor
here i'll post some images and progress when building some paste-dispensers of different size and later some fabbing-samples ...
First the images of pre-assembling a 'mini'-dispenser with a 5ml-cartouche
1. - all parts:
2. - pre-assembled an in 'load'-position:
3. - 'empty'-position:
Next i'll complete this type with a fixing-clamp for the cartouche, make some testt and build a second bigger one for 50ml-cartouches ...
The parts are easy enough to reprap them, so everyone is encouraged to make his/her own or develop better concepts ...
Viktor
|
Re: Simple Dispenser November 25, 2008 06:02PM |
looks good.
maybe you can modify the existing reprapped version (if you can get hold of the stls that is)
[blog.reprap.org]
'sid
PS Now I know...
I knew it looks familiar.
Blogentry: [builders.reprap.org] // "Biollante Regenerates"
Edited 1 time(s). Last edit at 11/25/2008 06:04PM by sid.
maybe you can modify the existing reprapped version (if you can get hold of the stls that is)
[blog.reprap.org]
'sid
PS Now I know...
I knew it looks familiar.
Blogentry: [builders.reprap.org] // "Biollante Regenerates"
Edited 1 time(s). Last edit at 11/25/2008 06:04PM by sid.
|
Re: Simple Dispenser February 24, 2009 02:21PM |
Hi chempi,
here the images of the completed assembly:
... and the cartouche-head:
In my first post you can see all the parts - i added only an L-shape-rail against freerun of the nut and a spring as cartouche-holder.
For UV-curable resins (especially "Acrifix 192") i added 6 UV-LED's.
There is no list - i milled some blades with the right holes for the special cartouche and have to make another set for the bigger ones ...
Viktor
here the images of the completed assembly:
... and the cartouche-head:
In my first post you can see all the parts - i added only an L-shape-rail against freerun of the nut and a spring as cartouche-holder.
For UV-curable resins (especially "Acrifix 192") i added 6 UV-LED's.
There is no list - i milled some blades with the right holes for the special cartouche and have to make another set for the bigger ones ...
Viktor
|
Re: Simple Dispenser February 25, 2009 01:28PM |
... here the image of the dispenser mounted beside my millhead:
|
Re: Simple Dispenser March 12, 2010 05:42PM |
I noticed, via
[objects.reprap.org]
Thank you.
-Sebastien, RepRap.org library gnome.
Remember, you're all RepRap developers (once you've joined the super-secret developer mailing list), and the wiki, RepRap.org, [reprap.org] is for everyone and everything!
[objects.reprap.org]
Thank you.
-Sebastien, RepRap.org library gnome.
Remember, you're all RepRap developers (once you've joined the super-secret developer mailing list), and the wiki, RepRap.org, [reprap.org] is for everyone and everything!
|
Re: Simple Dispenser December 07, 2012 05:24AM |
Hi Viktor,
So another try to write something into the forum
Iam from Austria and you?
Mmmh no I dont have a linear drive, but most of the other stuff. Well I will try but if it lack could you do me one of these. I wonder if its possible to print some of the parts...
volker
So another try to write something into the forum
Iam from Austria and you?
Mmmh no I dont have a linear drive, but most of the other stuff. Well I will try but if it lack could you do me one of these. I wonder if its possible to print some of the parts...
volker
|
Re: Simple Dispenser December 07, 2012 06:11AM |
Hi Volker,
I'm located near Frankfurt/Main ... shipping shouldn't be a problem, but getting time to build a new one could be harder to achieve
Do you have some specs/dimensions?
I've ordered the cartouches at Globaco - they have different sizes and types, what should be considered first ...
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]
Call for the project "garbage-free seas" - [reprap.org]
I'm located near Frankfurt/Main ... shipping shouldn't be a problem, but getting time to build a new one could be harder to achieve
Do you have some specs/dimensions?
I've ordered the cartouches at Globaco - they have different sizes and types, what should be considered first ...
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]
Call for the project "garbage-free seas" - [reprap.org]
|
Re: Simple Dispenser December 15, 2012 04:10PM |
... ja, kannst du machen
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]
Call for the project "garbage-free seas" - [reprap.org]
Viktor
--------
Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]
Call for the project "garbage-free seas" - [reprap.org]
Sorry, only registered users may post in this forum.