Welcome! Log In Create A New Profile

Endstops won't work Gen 7(1.4.1)/Teacup

Posted by iamay

iamay

Endstops won't work Gen 7(1.4.1)/Teacup
November 15, 2013 01:18AM

Registered: 11 years ago
Posts: 23

My printer would overlook the endstops and the motors would continue running for all the three axes when I give a manual command on Pronterface or even when homing individually or all the axes.

m119 shows X;1 Y:1 Z:1 when the stops aren't clicked and
shows X;0 Y:0 Z:0 when the stops are clicked.

using teacup

Reply Quote

iamay

Re: Endstops won't work Gen 7(1.4.1)/Teacup
November 15, 2013 03:09AM

Registered: 11 years ago
Posts: 23

Okay made them work now the axes would home fine but as the carriages hit their respective endstops they are supposed to move back a little but mine won't and the endstop remain clicked though the motors would turn off. Is it supposed to be just like that using Teacup ?