burning the bootloader! February 20, 2013 09:45AM |
Registered: 11 years ago Posts: 26 |
Re: burning the bootloader! February 21, 2013 06:44PM |
Registered: 12 years ago Posts: 39 |
Re: burning the bootloader! February 22, 2013 07:19AM |
Registered: 13 years ago Posts: 7,616 |
Generation 7 Electronics | Teacup Firmware | RepRap DIY |
Re: burning the bootloader! February 22, 2013 02:29PM |
Registered: 11 years ago Posts: 26 |
Re: burning the bootloader! February 22, 2013 08:08PM |
Registered: 12 years ago Posts: 39 |
Re: burning the bootloader! February 28, 2013 11:09AM |
Registered: 11 years ago Posts: 26 |
Re: burning the bootloader! March 01, 2013 08:16AM |
Registered: 13 years ago Posts: 7,616 |
Quote
the green power led blinks for a second when i attach an ATX supply
Quote
with and without the ATX power attached
Generation 7 Electronics | Teacup Firmware | RepRap DIY |
Re: burning the bootloader! March 03, 2013 06:06PM |
Registered: 11 years ago Posts: 26 |
Re: burning the bootloader! March 04, 2013 03:03AM |
Registered: 13 years ago Posts: 7,616 |
Quote
the yellow led is on but there is 0 V between pins 19 & 20. Does this indicate a defective chip?
Quote
Also, is it good or bad to connect the GND and +5V lines on the ICSP when the target board is independently powered?
Generation 7 Electronics | Teacup Firmware | RepRap DIY |
Re: burning the bootloader! March 04, 2013 04:08AM |
Registered: 11 years ago Posts: 26 |
Re: burning the bootloader! March 04, 2013 07:32PM |
Registered: 12 years ago Posts: 39 |
Re: burning the bootloader! March 05, 2013 04:57AM |
Registered: 13 years ago Posts: 7,616 |
Quote
I think i read somewhere that one should not interconnect different power supplies like that..
Generation 7 Electronics | Teacup Firmware | RepRap DIY |
Re: burning the bootloader! March 05, 2013 10:42AM |
Registered: 11 years ago Posts: 26 |
Re: burning the bootloader! March 05, 2013 03:54PM |
Registered: 13 years ago Posts: 7,616 |
Generation 7 Electronics | Teacup Firmware | RepRap DIY |
Re: burning the bootloader! March 06, 2013 02:37AM |
Registered: 12 years ago Posts: 39 |
Re: burning the bootloader! March 07, 2013 12:23PM |
Registered: 11 years ago Posts: 26 |
Re: burning the bootloader! March 07, 2013 08:22PM |
Registered: 12 years ago Posts: 39 |
Re: burning the bootloader! March 08, 2013 06:48AM |
Registered: 13 years ago Posts: 7,616 |
Quote
Is there a way to check if the crystal is working?
Generation 7 Electronics | Teacup Firmware | RepRap DIY |
Re: burning the bootloader! March 08, 2013 11:37AM |
Registered: 11 years ago Posts: 26 |
Re: burning the bootloader! March 08, 2013 12:37PM |
Registered: 12 years ago Posts: 39 |
Re: burning the bootloader! March 08, 2013 05:04PM |
Registered: 11 years ago Posts: 26 |
Re: burning the bootloader! March 08, 2013 05:47PM |
Registered: 12 years ago Posts: 39 |
Re: burning the bootloader! March 15, 2013 04:06AM |
Registered: 11 years ago Posts: 26 |
Re: burning the bootloader! March 15, 2013 06:46AM |
Registered: 13 years ago Posts: 7,616 |
Generation 7 Electronics | Teacup Firmware | RepRap DIY |