Welcome! Log In Create A New Profile

Source of ABS

Posted by keffin

keffin

Source of ABS
January 25, 2012 05:06AM

Registered: 13 years ago
Posts: 19

Hey guys,

Where do you guys get your ABS supplies from?

I bought some from Esunpla, we agreed on 10 colours of ABS 1 kg each. What I received was 7 colours of 1.5 kg ABS and 1 kg (i think) of PLA. Upon query, they told me they only had 1.5 spools and the remaining colours were not up to par. WTF? Has anybody else ordered from them, and what was your experience like?

Keff

Edited 1 time(s). Last edit at 01/25/2012 05:17AM by keffin.

Reply Quote

keffin

Re: Source of ABS
January 25, 2012 10:06AM

Registered: 13 years ago
Posts: 19

Update:

Esunpla has apologised and I have accepted it. Will test out their filament and see if it gives good prints.

K

Reply Quote

Soon Wei

Re: Source of ABS
January 26, 2012 12:21AM

Registered: 15 years ago
Posts: 112

What's the diameter of the filament?

Reply Quote

keffin

Re: Source of ABS
January 26, 2012 03:21AM

Registered: 13 years ago
Posts: 19

Its 3mm. It seems to be a little goopier than the Makerbot filament, even at 210. I am testing at lower temps.

K

Reply Quote

keffin

Re: Source of ABS
January 26, 2012 09:51PM

Registered: 13 years ago
Posts: 19

I seem to get best results at 245 C. But the quality of the prints is almost, but still not as good as the Makerbot filament tho.

With the Makerbot filament I can get nice top surfaces with 2 layers. With Esunpla ABS, I need to use 3 layers for reliable results.

K