Touch screen options for printer using an Einsy Rambo 1.1a. May 15, 2019 07:40PM |
Registered: 6 years ago Posts: 10 |
Re: Touch screen options for printer using an Einsy Rambo 1.1a. May 15, 2019 08:25PM |
Admin Registered: 13 years ago Posts: 7,000 |
Re: Touch screen options for printer using an Einsy Rambo 1.1a. May 15, 2019 09:01PM |
Registered: 6 years ago Posts: 10 |
Quote
Dust
On the Einsy tx0/rx0 is available on tp25 and tp26 or directly off of chip u10
or you can use rx1/tx1 on j19 and change your serial port in the firmware to 1 (this will disable the usb cable)
or you can use rx3/tx3 on Ext P2 and change your serial port in the firmware to 3 (this will disable the usb cable)
Re: Touch screen options for printer using an Einsy Rambo 1.1a. May 15, 2019 09:31PM |
Admin Registered: 13 years ago Posts: 7,000 |