DS EVIL FORGE






if some one have ANY QUESTIONS, feel to free contact us ;-)

Edited 1 time(s). Last edit at 11/30/2015 09:48AM by DS Greece.

resolution of EF is 4 microns, DS hotend 1.8, speed up to 250mm/s


example of printing :

some data about EF ;-)


- very high resolution - 333steps /mm
- fast and smooth printing ( general abs setup is on 200mm/s ;-) )
- very strong alectornic ARM 84 mhz !
- high quality and very stable linear system
- high quality full metal hotend , tested over 400 celsius
- full online suport
- sd for non PC printing
- tested with : ABS,PLA,TPU,TPE,PC,NYLON and many others
- tested in very hard duty
- Repetier host compatible
- Bluetooth for non cable safe comunication with your PC
- large printing space 200x200x250 mm


if you have some questions, just feel free ask ;-)

Edited 1 time(s). Last edit at 12/02/2015 10:43AM by DS Greece.