Hello,
What bed thermistor is shipped with new Reprappro Huxleys?
I've compiled a Marlin branch with "8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)" as the bed sensor but the temperature readings are about 10°C too low, I have uploaded the Huxley firmware again and it reads correctly so it's not a wiring problem.
I have attached the configuration.h file and will be grateful for any suggestions or assistance.
Paul
Edited 2 time(s). Last edit at 02/16/2014 04:33PM by paulnd.