Welcome! Log In Create A New Profile


can someone help me with my printer

Posted by Reece 
can someone help me with my printer
May 29, 2014 09:27AM
Its been a year since i first got my huxley i have finally got it kinda working but there is a problem with its print quality as you can see from the attached picture theres no layer quality it all just seems to be blobbed plastic i have also attached the G-code file for the longer spanner. If anyone can help me out that would be great, thanks for your time
open | download - WP_20140529_001.jpg (385.5 KB)
open | download - WP_20140529_002.jpg (384.8 KB)
open | download - 3mm_Spanner.gcode (95.2 KB)
Re: can someone help me with my printer
May 30, 2014 02:47PM
Hi Reece

I think we've emailed each other quite a few times... and I think you're still having the same problem. The temperature of the extrusion is far too hot; it's burning the plastic as it prints. The filament won't be extruded, it'll be running out of the hot end like water. I can see it sets the temperature at 180C in the gcode. Can you remind me where we got to with trying to sort out the temperature problem? I've changed computers since the last time you emailed, and don't have the history of our conversation.

Also, if you can post the response to M503, and maybe some pictures of your hot end, that may help.

RepRapPro tech support
Re: can someone help me with my printer
May 31, 2014 01:14AM
dear friend:
what material do you use ? ABS filament or PLA filament or other?

The manufacturer of 3d printer He3d
website: www.reprap.cn
Email:[email protected]
Sorry, only registered users may post in this forum.

Click here to login