Posted by HereIgoAgain

speed issues with ramps 1.4 April 24, 2012 07:50AM |
Registered: 8 years ago Posts: 125 |

Finally have everything set up and seemingly working with my 1.4ramps. However when running the ReplicatorG or Proterface software the machine runs glacially slow. I can move the x,y or z azis any distance I choose ...and it runs smooth but once i load the gcode the machine barely moves. I've tried tweeking the available commands but nothing seems to happen. Any ideas ??

thanks

thanks

Re: speed issues with ramps 1.4 April 24, 2012 08:35AM |
AdminRegistered: 12 years ago Posts: 12,314 |

... can you post a snippet of your G-code?

Viktor

--------

Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]

Viktor

--------

Aufruf zum Projekt "Müll-freie Meere" - [reprap.org] -- Deutsche Facebook-Gruppe - [www.facebook.com]

Call for the project "garbage-free seas" - [reprap.org]

Re: speed issues with ramps 1.4 April 24, 2012 09:19PM |
Registered: 8 years ago Posts: 125 |

Hi Viktor,

thanks for responding.Here is a bit of the gcode generated with skeinforge. I was unable to generate the code using the replicatorG software.

G90

G21

M103

M105

M106

M140 S60.0

M141 S30.0

M142 S0.0

M113 S1.0

M108 S210.0

M104 S200.0

G1 X-5.76 Y38.808 Z0.72 F60.0

M101

G1 X-5.76 Y44.712 Z0.72 F240.0

M103

G1 X-2.88 Y50.472 Z0.72 F960.0

M101

G1 X-2.88 Y33.048 Z0.72 F240.0

G1 X0.0 Y30.168 Z0.72 F240.0

G1 X0.0 Y53.352 Z0.72 F240.0

G1 X2.88 Y54.792 Z0.72 F240.0

G1 X2.88 Y28.728 Z0.72 F240.0

M103

G1 X2.88 Y23.112 Z0.72 F960.0

M101

G1 X2.88 Y7.128 Z0.72 F240.0

G1 X0.0 Y7.128 Z0.72 F240.0

G1 X0.0 Y21.672 Z0.72 F240.0

G1 X-2.88 Y21.672 Z0.72 F240.0

G1 X-2.88 Y8.568 Z0.72 F240.0

M103

G1 X5.76 Y4.248 Z0.72 F960.0

M101

G1 X5.76 Y54.792 Z0.72 F240.0

G1 X8.64 Y54.792 Z0.72 F240.0

G1 X8.64 Y-2.952 Z0.72 F240.0

G1 X11.52 Y-2.952 Z0.72 F240.0

G1 X11.52 Y54.792 Z0.72 F240.0

G1 X14.4 Y54.792 Z0.72 F240.0

G1 X14.4 Y-2.952 Z0.72 F240.0

G1 X17.28 Y-2.952 Z0.72 F240.0

G1 X17.28 Y54.792 Z0.72 F240.0

G1 X20.16 Y54.792 Z0.72 F240.0

G1 X20.16 Y-2.952 Z0.72 F240.0

G1 X23.04 Y-2.952 Z0.72 F240.0

G1 X23.04 Y54.792 Z0.72 F240.0

G1 X25.92 Y54.792 Z0.72 F240.0

G1 X25.92 Y-2.952 Z0.72 F240.0

G1 X28.8 Y-2.952 Z0.72 F240.0

G1 X28.8 Y54.792 Z0.72 F240.0

G1 X31.68 Y54.792 Z0.72 F240.0

G1 X31.68 Y-2.952 Z0.72 F240.0

G1 X34.56 Y-2.952 Z0.72 F240.0

G1 X34.56 Y54.792 Z0.72 F240.0

G1 X37.44 Y54.792 Z0.72 F240.0

G1 X37.44 Y5.688 Z0.72 F240.0

G1 X40.32 Y7.128 Z0.72 F

thanks for responding.Here is a bit of the gcode generated with skeinforge. I was unable to generate the code using the replicatorG software.

G90

G21

M103

M105

M106

M140 S60.0

M141 S30.0

M142 S0.0

M113 S1.0

M108 S210.0

M104 S200.0

G1 X-5.76 Y38.808 Z0.72 F60.0

M101

G1 X-5.76 Y44.712 Z0.72 F240.0

M103

G1 X-2.88 Y50.472 Z0.72 F960.0

M101

G1 X-2.88 Y33.048 Z0.72 F240.0

G1 X0.0 Y30.168 Z0.72 F240.0

G1 X0.0 Y53.352 Z0.72 F240.0

G1 X2.88 Y54.792 Z0.72 F240.0

G1 X2.88 Y28.728 Z0.72 F240.0

M103

G1 X2.88 Y23.112 Z0.72 F960.0

M101

G1 X2.88 Y7.128 Z0.72 F240.0

G1 X0.0 Y7.128 Z0.72 F240.0

G1 X0.0 Y21.672 Z0.72 F240.0

G1 X-2.88 Y21.672 Z0.72 F240.0

G1 X-2.88 Y8.568 Z0.72 F240.0

M103

G1 X5.76 Y4.248 Z0.72 F960.0

M101

G1 X5.76 Y54.792 Z0.72 F240.0

G1 X8.64 Y54.792 Z0.72 F240.0

G1 X8.64 Y-2.952 Z0.72 F240.0

G1 X11.52 Y-2.952 Z0.72 F240.0

G1 X11.52 Y54.792 Z0.72 F240.0

G1 X14.4 Y54.792 Z0.72 F240.0

G1 X14.4 Y-2.952 Z0.72 F240.0

G1 X17.28 Y-2.952 Z0.72 F240.0

G1 X17.28 Y54.792 Z0.72 F240.0

G1 X20.16 Y54.792 Z0.72 F240.0

G1 X20.16 Y-2.952 Z0.72 F240.0

G1 X23.04 Y-2.952 Z0.72 F240.0

G1 X23.04 Y54.792 Z0.72 F240.0

G1 X25.92 Y54.792 Z0.72 F240.0

G1 X25.92 Y-2.952 Z0.72 F240.0

G1 X28.8 Y-2.952 Z0.72 F240.0

G1 X28.8 Y54.792 Z0.72 F240.0

G1 X31.68 Y54.792 Z0.72 F240.0

G1 X31.68 Y-2.952 Z0.72 F240.0

G1 X34.56 Y-2.952 Z0.72 F240.0

G1 X34.56 Y54.792 Z0.72 F240.0

G1 X37.44 Y54.792 Z0.72 F240.0

G1 X37.44 Y5.688 Z0.72 F240.0

G1 X40.32 Y7.128 Z0.72 F

Re: speed issues with ramps 1.4 April 25, 2012 02:14AM |
Registered: 10 years ago Posts: 3,735 |

What do you have set in the Speed tab?

And what factors are you using for first layer, etcetera?

And EVEN MORE IMPORTANT you don't have any E values.

And you need a Replace.csv file to get rid of the M101, M103, and other unused gcodes.

Edited 2 time(s). Last edit at 04/25/2012 02:16AM by rhmorrison.

Wörth am Rhein, Germany

BLOG - PHOTOS - Thingiverse

Sorry, only registered users may post in this forum.