Welcome! Log In Create A New Profile

Advanced

X and Y axis motors simultaneously while using Marlin and RAMPS 1.4

Posted by deepsharma 
X and Y axis motors simultaneously while using Marlin and RAMPS 1.4
December 04, 2015 02:59AM
I'm using Marlin on ramps 1.4 with Reprapdiscount full graphics lcd controller (128x64)
I interfaced the printer with Prontrface software.

When i try to move X axis, both X and Y axis motors starts moving
Similarly with Y axis also.

what things do i need to do to rectify the issue.
Re: X and Y axis motors simultaneously while using Marlin and RAMPS 1.4
December 04, 2015 06:16AM
It is difficult to help you without having more detailed information...

What type of printer is it? Is Marlin configured correctly for your type of printer?

E.g. if you have a standard Cartesian printer (such as Prusa Mendel of i3) and you configure it as some special geometry printer like CoreXY or Delta (or vice versa), then the axes would do strange combined movements...
Sorry, only registered users may post in this forum.

Click here to login