Nach Eigenbau kein weiterkommen beim Homing 17. March 2017 15:37 |
Registrierungsdatum: 7 Jahre zuvor Beiträge: 3 |
Re: Nach Eigenbau kein weiterkommen beim Homing 18. March 2017 01:56 |
Registrierungsdatum: 8 Jahre zuvor Beiträge: 888 |
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.Das ist der Bereich in der Configuration.h von Marlin der relevant ist.
Re: Nach Eigenbau kein weiterkommen beim Homing 19. March 2017 07:23 |
Registrierungsdatum: 9 Jahre zuvor Beiträge: 1.197 |
Re: Nach Eigenbau kein weiterkommen beim Homing 19. March 2017 15:48 |
Registrierungsdatum: 9 Jahre zuvor Beiträge: 1.361 |