Squeaking Extruder
Posted by alexbil
|
Squeaking Extruder March 04, 2013 04:54PM |
Registered: 10 years ago Posts: 24 |
Hello everyone,
I recently ordered a Reprappro Mendel, and finished the whole assembly. Everything works fine, excep one thing : the extruder.
It is squeaking, and the large gear does not rotate (the large gear oscillates but does not move).
I checked the current as it is written in the wiki, and tried to increase it, but there is no difference...It is still squeazing
Does someone have a solution, or an idea of what I could do to eventually print ?
Thank you !
Edited 1 time(s). Last edit at 03/05/2013 02:01AM by alexbil.
Reprappro Mendel, plus d'informations pour le montage et le calibrage sur [velocirepraptor.com]
I recently ordered a Reprappro Mendel, and finished the whole assembly. Everything works fine, excep one thing : the extruder.
It is squeaking, and the large gear does not rotate (the large gear oscillates but does not move).
I checked the current as it is written in the wiki, and tried to increase it, but there is no difference...It is still squeazing
Does someone have a solution, or an idea of what I could do to eventually print ?
Thank you !
Edited 1 time(s). Last edit at 03/05/2013 02:01AM by alexbil.
Reprappro Mendel, plus d'informations pour le montage et le calibrage sur [velocirepraptor.com]
|
Re: Squeazing Extruder March 04, 2013 07:48PM |
Registered: 10 years ago Posts: 1,592 |
|
Re: Squeaking Extruder March 05, 2013 02:02AM |
Registered: 10 years ago Posts: 24 |
|
Re: Squeaking Extruder March 05, 2013 02:37AM |
Registered: 10 years ago Posts: 40 |
|
Re: Squeaking Extruder March 05, 2013 04:13AM |
Registered: 10 years ago Posts: 24 |
|
Re: Squeaking Extruder March 05, 2013 05:27AM |
Registered: 10 years ago Posts: 1,592 |
|
Re: Squeaking Extruder March 05, 2013 12:32PM |
Registered: 10 years ago Posts: 79 |
|
Re: Squeaking Extruder March 05, 2013 02:45PM |
Registered: 10 years ago Posts: 24 |
|
Re: Squeaking Extruder March 06, 2013 04:14AM |
Registered: 10 years ago Posts: 24 |
|
Re: Squeaking Extruder March 06, 2013 06:07PM |
Registered: 10 years ago Posts: 1,592 |
alexbil Wrote:
-------------------------------------------------------
> Thank you for the advice, I'll dismount the
> exrtruder to see if there is a constriction in the
> hot end, or a broken wire... I'll tell you !
> This is a weird problem, as sometimes the extruder
> works, and all of a sudden it starts squeaking..
Well, I didn't realize that! Have you checked the motor connector that plugs into the mainboard? No pins pushed back? Or maybe a dry/ bad joint on the board?
Edited 2 time(s). Last edit at 03/06/2013 06:33PM by waitaki.
-------------------------------------------------------
> Thank you for the advice, I'll dismount the
> exrtruder to see if there is a constriction in the
> hot end, or a broken wire... I'll tell you !
> This is a weird problem, as sometimes the extruder
> works, and all of a sudden it starts squeaking..
Well, I didn't realize that! Have you checked the motor connector that plugs into the mainboard? No pins pushed back? Or maybe a dry/ bad joint on the board?
Edited 2 time(s). Last edit at 03/06/2013 06:33PM by waitaki.
|
Re: Squeaking Extruder March 07, 2013 05:21AM |
Registered: 10 years ago Posts: 24 |
|
Re: Squeaking Extruder March 07, 2013 03:14PM |
Registered: 10 years ago Posts: 56 |
|
Re: Squeaking Extruder March 08, 2013 04:28AM |
Registered: 10 years ago Posts: 24 |
Sorry, only registered users may post in this forum.