Last few lines of g-code fail to print April 16, 2013 05:00PM |
Registered: 11 years ago Posts: 8 |
Re: Last few lines of g-code fail to print April 16, 2013 11:34PM |
Registered: 12 years ago Posts: 174 |
Re: Last few lines of g-code fail to print April 17, 2013 06:59PM |
Registered: 11 years ago Posts: 8 |
Re: Last few lines of g-code fail to print April 17, 2013 10:11PM |
Registered: 12 years ago Posts: 174 |
Re: Last few lines of g-code fail to print April 18, 2013 10:30AM |
Registered: 11 years ago Posts: 8 |
Re: Last few lines of g-code fail to print May 10, 2013 02:12AM |
Registered: 11 years ago Posts: 31 |
Re: Last few lines of g-code fail to print May 10, 2013 11:26PM |
Registered: 12 years ago Posts: 174 |
Re: Last few lines of g-code fail to print May 11, 2013 10:42AM |
Registered: 11 years ago Posts: 8 |
Re: Last few lines of g-code fail to print May 12, 2013 01:35AM |
Registered: 11 years ago Posts: 31 |
Re: Last few lines of g-code fail to print May 12, 2013 04:46AM |
Registered: 11 years ago Posts: 8 |
Re: Last few lines of g-code fail to print May 12, 2013 04:32PM |
Registered: 12 years ago Posts: 17 |
G92 Z0 ; set Z to zero G1 X0 Y200 Z10; elevate 10mm, move to left and backThis will move your nozzle up 10mm and to the left side and move the print bed all the way forward so the piece can easily be removed. The G92 and G1 commands get queued correctly, so the last layer will be printed completely.
Re: Last few lines of g-code fail to print May 12, 2013 05:10PM |
Registered: 11 years ago Posts: 31 |
Re: Last few lines of g-code fail to print May 12, 2013 09:38PM |
Registered: 12 years ago Posts: 174 |
Re: Last few lines of g-code fail to print May 13, 2013 03:27AM |
Registered: 11 years ago Posts: 8 |
Re: Last few lines of g-code fail to print May 14, 2013 01:50AM |
Registered: 11 years ago Posts: 31 |
Re: Last few lines of g-code fail to print May 14, 2013 02:58AM |
Registered: 11 years ago Posts: 8 |
Re: Last few lines of g-code fail to print May 14, 2013 01:41PM |
Registered: 11 years ago Posts: 31 |
Re: Last few lines of g-code fail to print May 14, 2013 01:46PM |
Registered: 11 years ago Posts: 31 |
Re: Last few lines of g-code fail to print May 14, 2013 10:35PM |
Registered: 13 years ago Posts: 643 |