Welcome! Log In Create A New Profile


ABS Print

Posted by Osios 
ABS Print
April 09, 2014 09:50PM
Issue printing ABS, not 100% sure what it is smaller prints come out fine, larger prints run into problems.... I made an enclosure to help trap the heat, which helped with some delamination problems I was having used glue stick
which worked pretty good, will probably use abs juice in the future though
nozzle: 245
bed: 110
layer height: 0.1

using E3D Hotend 0.4
open | download - abdprint issues.jpg (206.2 KB)
Re: ABS Print
April 10, 2014 04:30AM
got help from irc thanks anyways
Re: ABS Print
April 10, 2014 08:21AM
what was the problem then ?
Re: ABS Print
April 11, 2014 03:14AM
Printing to hot, over extrusion
Re: ABS Print
April 11, 2014 03:25AM
Printing to hot, over extrusion
at what temperature ??
Re: ABS Print
April 11, 2014 10:38PM
I was printing at 245, attempting to get better bonding between the layers, due to issues with delamination, I was able to print at 225 with an enclosure with good layer adherence, lower the extrusion multiplier from 1.0 to 0.9 and print quality improved a lot, still have some tweaking to do, but its a step in the right direction
Re: ABS Print
April 13, 2014 05:34PM
I print at 240 with a bed of 130 with ABS wrapped my machine in foil to so it keeps heat in. Seems to work ok still not perfect!
Re: ABS Print
May 05, 2014 09:53AM
For ABS filament, 230-250 degree is normal, I think.

China 3D Printing Filament Factory
0.05mm Tolerance/22 Colors/ Fast Delivery
Ana Lucia
Sorry, only registered users may post in this forum.

Click here to login