Hello everyone. Issues with my extruder wont stop. Extruder motor works manually, but wont work with G code. I dont know, whats wrong. Currently I set my max feedrate to 5 mm/s and it wont work. Here is a piece of my g code:
G21 ; set units to millimeters
M190 S50 ; wait for bed temperature to be reached
G28 ; home all axes
G90 ; use absolute coordinates
G21 ; set units to millimeters
G92 E0
M82 ; use absolute distances for extrusion
M109 S190 ; wait for temperature to be reached
G1 E10 F200 ; prime the nozzle
G90 ; use absolute coordinates
G92 E0
M82 ; use absolute distances for extrusion
G1 F2700.000 E-1.50000
G92 E0
G1 Z0.250 F12000.000
G1 X0.000 Y13.300 F12000.000
G1 E1.50000 F2700.000
G1 X-8.500 Y13.300 E1.80737 F360.000
G1 X-10.790 Y12.903 E1.89140
G1 X-12.812 Y11.758 E1.97543
G1 X-14.331 Y9.999 E2.05946
G1 X-15.168 Y7.832 E2.14349
G1 X-15.300 Y6.500 E2.19188
Any ideas?