Welcome! Log In Create A New Profile


Small print with repetier

Posted by RTTY177 
Small print with repetier
July 30, 2015 04:33PM
Hi all
Am having much trouble with my prints using repetier Version 1.5.4, tryed to print a part that should be 70 X 20 mm and end up with
the print being 10 X 5 mm. Using a Prusa 1.5 printer and X and Y calibration seem ok in that if i move 10 mm it measures 10 mm, at this point Im at a loss as to the problem
also if I use Repetier to scale a part up when I print it end up with the original part size.
Hope someone might have a idea as to what might be wrong.
Re: Small print with repetier
July 30, 2015 11:27PM
Does this happen with everything you attempt to print or just this item? Are your printer settings correct within repetier? I would also try slicing with Slice3r and using pronterface as a host.
Re: Small print with repetier
July 31, 2015 11:12AM
Thanks for the reply and yes it only happens with a few parts that Im trying to print, yes my printer setting are correct and Ive tried slic3r and cura as sliceing and get the same results.
Sorry, only registered users may post in this forum.

Click here to login