Welcome! Log In Create A New Profile

Layers issues

Posted by korzo

korzo

Layers issues
August 15, 2015 12:50PM

Registered: 10 years ago
Posts: 3

Hi!
I have some random irregularities on my layers and I cannot find the solution. Im printing with 185º PLA but sometimes it happens with ABS. This issue could appear on the first layer, in the middle or in the top and not necessary in the whole layer.

I attach some pictures to show the problem.

vx22iWi.png

IgZr7Th.jpg

gx4sp9Z.jpg

Thanks in advance!

Reply Quote

SlowFoot

Re: Layers issues
August 16, 2015 11:19AM

Registered: 10 years ago
Posts: 150

Always on diagonal prints?
My guess is that too much resistants/too little power make a motor skip micro steps. Could also be vibrations in the bed or hot end but you should be able to see and/or hear that.

Reply Quote

korzo

Re: Layers issues
August 16, 2015 11:45AM

Registered: 10 years ago
Posts: 3

it happens in horizontal prints too. I don't hear or see anything not normal, it just appears.

Reply Quote

Floyd

Re: Layers issues
August 16, 2015 01:37PM

Registered: 12 years ago
Posts: 770

Mine does this too when I overextrude on the first layer.

Reply Quote

korzo

Re: Layers issues
August 23, 2015 02:05PM

Registered: 10 years ago
Posts: 3

Principally I solved the problem changing the hobbed bolt and calibrating the X axis.

Thanks to all.