Bed temperature

Hello Everybody

I'm trying to print large parts with ABS (600 mm), after reviewing several fórums and web pages I'm still confused regarding bed temperature. Some recommend top reduce bed temperature from 110 to 80 after first or second layer, and other to maintain it in 110. Somebody could comment about what is the best option.

PS: We already enclosed our printer to try to maintan a constant temperature around the printed object.

Thank you...

I usually start at 105C then drop the temperature to about 90 or 95C after the first layer, printing on clean kapton tape. You will want the enclosure temperature to get to about 45-50C to minimize or eliminate delamination and warping.

---

Ultra MegaMax Dominator 3D printer: [drmrehorst.blogspot.com]

Thank you for your advice, we will test with your recommende temperatures!