Welcome! Log In Create A New Profile

terrible printing

Posted by inaali

inaali

terrible printing
March 19, 2016 09:19PM

Registered: 8 years ago
Posts: 4

Can any one help me out in finding out the problem
In mini kossel 3d printer
The flow of filament from nozzel is not continuous
My slic3r settings are
Layer ht 0.2mm
Perimeters 3 mm
Infill 80%
Temp 210
Extrusion mutiplier 0.9

Reply Quote

Attachments:
open | download - 10404371_179285735794328_7290950456063210343_n.jpg (45.9 KB)

elkoreas

Re: terrible printing
March 26, 2016 05:27AM

Registered: 8 years ago
Posts: 4

check the distance between the bed and the nozzle and set the extrusion mutiplier 1

Reply Quote

chris33

Re: terrible printing
March 26, 2016 08:07AM

Registered: 11 years ago
Posts: 973

is your extruder calibrated?

Check my rubbish blog for my prusa i3

up and running
[3dimetech.blogspot.co.uk]

Reply Quote

inaali

Re: terrible printing
March 26, 2016 03:18PM

Registered: 8 years ago
Posts: 4

hello chris

i have set my Bowden extruder steps to 484 mm
or

can you tell me how to calibrate extruder
because it is my first time using 3d printer and other settings to calibrate
because i am facing a lot of issues in printing

Reply Quote

MrBaz

Re: terrible printing
March 26, 2016 05:02PM

Registered: 10 years ago
Posts: 154

What material are you printing? 210*C is too low for ABS. Ramp that thing up to at least 225*C. Maybe 230*C.

Reply Quote

chris33

Re: terrible printing
March 26, 2016 05:42PM

Registered: 11 years ago
Posts: 973

i used this guide triffid hunters guide, also measure your filament in several places and put in the mean value,as filament can be various widths check your hobbled gear isn't slipping i always file a flats if the motors don't have them so they grub hits a flat surface

Edited 1 time(s). Last edit at 03/26/2016 05:49PM by chris33.

Check my rubbish blog for my prusa i3

up and running
[3dimetech.blogspot.co.uk]