Welcome! Log In Create A New Profile

Is this banding?

Posted by wendychai80

Forum List Message List New Topic

wendychai80

Is this banding?
March 27, 2016 11:10AM

Registered: 10 years ago
Posts: 82

j90GZMMh.jpg

0iZFjndh.jpg

it only happened on that area.

Reply Quote

Montiey

Re: Is this banding?
March 27, 2016 04:40PM

Registered: 8 years ago
Posts: 183

Probably not. Maybe something related to your overhang quality.

Master Tinkerer

Reply Quote

wendychai80

Re: Is this banding?
March 27, 2016 10:35PM

Registered: 10 years ago
Posts: 82

How can i fix it?

Reply Quote

Montiey

Re: Is this banding?
March 28, 2016 09:07PM

Registered: 8 years ago
Posts: 183

That all really depends on slicer settings. If it happens in different spots per different model, then you don't have to worry about mechanical problems. Try using largly different I Infill percentages, and / or different layer heights. If changing lots of settings doesn't help, try a different slicer.

Master Tinkerer

Reply Quote

wendychai80

Re: Is this banding?
March 28, 2016 09:44PM

Registered: 10 years ago
Posts: 82

Quote
Montiey
That all really depends on slicer settings. If it happens in different spots per different model, then you don't have to worry about mechanical problems. Try using largly different I Infill percentages, and / or different layer heights. If changing lots of settings doesn't help, try a different slicer.

thank you, i think this one is 15% infill slice with cura with 0.2 layer height, i'll try with slic3r for next print

Reply Quote

friarfish

Re: Is this banding?
March 29, 2016 11:46AM

Registered: 9 years ago
Posts: 169

Have you thought about Kisslicer?
Slic3r is a big step in complexity plus, personal opinion, I never found the
removeable rafts very good.

Oh, slic3r is slow. A 3 hour print from kisslicer will be around 5 hours from
slic3r.

Reply Quote

wendychai80

Re: Is this banding?
March 29, 2016 11:56AM

Registered: 10 years ago
Posts: 82

Quote
friarfish
Have you thought about Kisslicer?
Slic3r is a big step in complexity plus, personal opinion, I never found the
removeable rafts very good.

Oh, slic3r is slow. A 3 hour print from kisslicer will be around 5 hours from
slic3r.

Thanks you for the suggestion, i already try kisslicer before this i think 2years ago when i still new to 3d printing drinking smiley

maybe it's time to try kisslicer once again smiling bouncing smiley

Reply Quote

hoxsiew

Re: Is this banding?
March 29, 2016 11:19PM

Registered: 8 years ago
Posts: 116

Whoops. Wrong post. Deleted.

Edited 1 time(s). Last edit at 03/29/2016 11:20PM by hoxsiew.