Welcome! Log In Create A New Profile

Head bed drops down to 60G

Posted by Luc358

Luc358

Head bed drops down to 60G
June 12, 2017 12:25PM

Registered: 7 years ago
Posts: 18

hello people,

so something weird is happening i was printing PETG with the heated bed set to 87G
but once every 10 seconds the printer says that it's 60G and then jumps back
anyone an idea? i have uploaded a foto of Octopi

Reply Quote

Attachments:
open | download - WhatsApp Image 2017-06-12 at 18.24.06.jpeg (46.1 KB)

deckingman

Re: Head bed drops down to 60G
June 12, 2017 04:49PM

Registered: 8 years ago
Posts: 622

I'd say that the spikes are too short in duration to be a true representation of the actual bed temperature, so it looks like a noisy signal. Could be a bad connection or picking up interference from a stepper or it's wiring. Whatever the cause, it looks like a wiring issue to me.

Reply Quote

Inhumierer

Re: Head bed drops down to 60G
June 14, 2017 05:27AM

Registered: 8 years ago
Posts: 201

Yes, looks like a bad wire. I had a similar issue with my extruder, and I found out that one of the cables was almost broken, giving a bad connection during extruder acceleration.