Welcome! Log In Create A New Profile


X400 printing small object ?

Posted by vladoff 
X400 printing small object ?
July 02, 2017 03:19PM
Hi to everyone,

I'm a newbie in the 3d printing and I'm trying to print the figure from the picture on X400, varying the print parameters, but no success.
Can anyone more experienced tell me if that is possible at all. Any advices are highly appreciated.
Thank you in advance.

Wrong topic. Please excuse me.

Edited 1 time(s). Last edit at 07/02/2017 03:32PM by vladoff.
open | download - Capture.PNG (137.2 KB)
Re: X400 printing small object ?
July 21, 2017 08:18PM
Are your measurements correct. this model appears to be only about 8mm square X 5mm in height.

Edited 1 time(s). Last edit at 07/21/2017 08:47PM by Roberts_Clif.
Re: X400 printing small object ?
July 27, 2017 11:53AM
8mm X 5mm Lattice structure.

If you are lucky.
Printed with a .15 High-Resolution Nozzle layer height of 0.08mm speed at 20mm-S without supports fan 75-90% on model you may print a 8mm Lattice Structure.

Watch this video [www.youtube.com]

Edited 2 time(s). Last edit at 07/27/2017 02:04PM by Roberts_Clif.
Sorry, only registered users may post in this forum.

Click here to login