Issues while printing a benchy model
December 17, 2017 06:21PM
Hi to everyone,
I tried to print a benchy after the installation of a tempered glass, but before the installation I was able to print an entirely benchy at 200°C for nozzle and 50 °C for the bed, but now, the bow at the beginning seems to be attached to the bed but during the printing procedure it goes up and the entire model detach from the bed, I calibrated the x,y and z axes so many times, but now I don't know how to solve this problem, I'm desperate about that.
Re: Issues while printing a benchy model
December 17, 2017 06:28PM
Glass is a thermal insulator. The surface temperature is probably 10C or so cooler than the temperature you set. Crank it up.


Ultra MegaMax Dominator 3D printer: [drmrehorst.blogspot.com]
Re: Issues while printing a benchy model
December 22, 2017 06:03AM
Thank you, now I can print all benchys that I want XD
Re: Issues while printing a benchy model
December 22, 2017 09:36AM
Great, just what the world needs....more Benchies.


Ultra MegaMax Dominator 3D printer: [drmrehorst.blogspot.com]
Sorry, only registered users may post in this forum.

Click here to login