RAMPS 1.6+; motors don't move October 26, 2018 01:59PM |
Registered: 9 years ago Posts: 24 |
Re: RAMPS 1.6+; motors don't move October 26, 2018 07:02PM |
Admin Registered: 13 years ago Posts: 7,002 |
Re: RAMPS 1.6+; motors don't move October 27, 2018 06:19AM |
Registered: 9 years ago Posts: 24 |
Re: RAMPS 1.6+; motors don't move October 27, 2018 06:26AM |
Admin Registered: 13 years ago Posts: 7,002 |
Re: RAMPS 1.6+; motors don't move October 27, 2018 07:49AM |
Registered: 9 years ago Posts: 24 |
Re: RAMPS 1.6+; motors don't move October 27, 2018 02:30PM |
Registered: 9 years ago Posts: 752 |
Re: RAMPS 1.6+; motors don't move October 27, 2018 03:05PM |
Registered: 9 years ago Posts: 24 |
Re: RAMPS 1.6+; motors don't move October 28, 2018 07:42AM |
Registered: 9 years ago Posts: 24 |
Re: RAMPS 1.6+; motors don't move October 28, 2018 11:05AM |
Registered: 9 years ago Posts: 752 |
Quote
MS1/MS2 are floating (around 0V)
Re: RAMPS 1.6+; motors don't move October 28, 2018 12:28PM |
Registered: 9 years ago Posts: 24 |
Re: RAMPS 1.6+; motors don't move October 28, 2018 12:52PM |
Registered: 9 years ago Posts: 752 |
Re: RAMPS 1.6+; motors don't move October 28, 2018 02:26PM |
Registered: 9 years ago Posts: 24 |
19:23:14.868 : N17 M503*19 19:23:14.914 : echo: G21 ; (mm) 19:23:14.915 : echo: Filament settings: Disabled 19:23:14.915 : echo: M200 D1.75 19:23:14.915 : echo: M200 D0 19:23:14.915 : echo: Steps per unit: 19:23:14.915 : echo: M92 X80.20 Y80.20 Z4000.00 E146.00 19:23:14.915 : echo: Maximum feedrates (units/s): 19:23:14.915 : echo: M203 X300.00 Y300.00 Z1.65 E25.00 19:23:14.916 : echo: Maximum Acceleration (units/s2): 19:23:14.916 : echo: M201 X2000 Y2000 Z100 E10000 19:23:14.916 : echo: Acceleration (units/s2): P R T 19:23:14.916 : echo: M204 P3000.00 R3000.00 T3000.00 19:23:14.950 : echo: Advanced: Q S T X Y Z E 19:23:14.950 : echo: M205 Q20000 S0.00 T0.00 X8.00 Y8.00 Z0.30 E5.00 19:23:14.950 : echo: Home offset: 19:23:14.950 : echo: M206 X0.00 Y0.00 Z0.00 19:23:14.951 : echo: PID settings: 19:23:14.951 : echo: M301 P24.10 I1.17 D124.38 19:23:14.951 : echo: M304 P344.88 I50.12 D593.33
Re: RAMPS 1.6+; motors don't move October 29, 2018 01:50AM |
Admin Registered: 13 years ago Posts: 7,002 |
Re: RAMPS 1.6+; motors don't move October 29, 2018 04:31AM |
Registered: 9 years ago Posts: 24 |
Re: RAMPS 1.6+; motors don't move October 29, 2018 04:35AM |
Admin Registered: 13 years ago Posts: 7,002 |
Re: RAMPS 1.6+; motors don't move October 29, 2018 04:46AM |
Registered: 9 years ago Posts: 24 |
Re: RAMPS 1.6+; motors don't move October 29, 2018 07:51AM |
Registered: 9 years ago Posts: 24 |
Re: RAMPS 1.6+; motors don't move October 29, 2018 05:21PM |
Registered: 9 years ago Posts: 752 |
Re: RAMPS 1.6+; motors don't move October 29, 2018 05:26PM |
Registered: 9 years ago Posts: 752 |
Re: RAMPS 1.6+; motors don't move October 29, 2018 05:28PM |
Registered: 9 years ago Posts: 24 |
Re: RAMPS 1.6+; motors don't move October 29, 2018 11:16PM |
Admin Registered: 13 years ago Posts: 7,002 |
Re: RAMPS 1.6+; motors don't move October 30, 2018 07:50AM |
Registered: 9 years ago Posts: 24 |
I checked, reset is floating, sleep is high.Quote
imqqmi
Oh and the reset and sleep pin, whats the signal lije on those?
Re: RAMPS 1.6+; motors don't move October 30, 2018 08:15AM |
Admin Registered: 13 years ago Posts: 7,002 |
Re: RAMPS 1.6+; motors don't move October 30, 2018 04:58PM |
Registered: 9 years ago Posts: 752 |
Re: RAMPS 1.6+; motors don't move October 31, 2018 04:27AM |
Registered: 9 years ago Posts: 24 |
Re: RAMPS 1.6+; motors don't move November 01, 2018 04:26PM |
Registered: 9 years ago Posts: 752 |
Re: RAMPS 1.6+; motors don't move November 02, 2018 10:20AM |
Registered: 9 years ago Posts: 24 |