Welcome! Log In Create A New Profile

Advanced

Extruder motor not moving when connected to E axis driver

Posted by 1162726 
Extruder motor not moving when connected to E axis driver
July 30, 2019 05:06PM
Recently I finished upgrading my Chinese prusa with TMCs and a BLTouch on Marlin 2.0. I tested the motors with the hotend at temperature and all but the extruder motor didn't move. Afterwards, I checked the wiring and tried swapping drivers to no avail. The motor works fine when connected to the X axis so I'm assuming its a software issue. M122 reports no issues either. I haven't seen this issue elsewhere online so help would be greatly appreciated.

Edited 1 time(s). Last edit at 07/30/2019 09:43PM by 1162726.
Re: Extruder motor not moving when connected to E axis driver
July 30, 2019 05:43PM
Upload your Marlin zipped to a download share site like Google drive I will have a look for you if you post a link here.


Electronics Technician / Computer Programmer
Re: Extruder motor not moving when connected to E axis driver
July 30, 2019 07:28PM
Sure thing.
Attachments:
open | download - Configuration_adv.h (98.9 KB)
open | download - Configuration.h (79.9 KB)
Sorry, only registered users may post in this forum.

Click here to login