hi
welcome my friends

I have a 3D printer from Zeepro and I have several problems
1 - First I did not know how to connect it through the Wi-Fi network because it does not show the name of the network (zim_insilization)
2 - I tried to contact them in several programs,for printing, but it did not work
Simplify3D not succ
RepetierHost not succ
3. The program that enabled me to print is a pronterface but
when click heat button the tempreture rise to 30 then dawn to zero why please help me

My Printer FEATURES & S PECIFICATIONS links

[www.manualslib.com]

machine type mendel

firmware ver marlin 1.0.28.9


thanks for all

Edited 1 time(s). Last edit at 08/27/2019 04:59AM by mohammad dwikat.

This is in no way shape or form a reprap, it is a commercial printer that is now obsolete since they stopped their cloud services,

It comes with two boards a A10 control board (which really has a a20 cpu on it) This is useless without the web site.

It also is meant to have a ramps inside it.

Most replace the A10 with a raspbury Pi running octoprint

[www.youtube.com]

ok sir thanks

but the was working ok i have to solve the problem

maybe in near future update this as you mention

is any other solution or not

very thanks

Take motherboard to a shop and have them solder an unpluged usb connect to the board - then use Simplify3d or Repetier to connect via the usb - either will work - I have had better luck with Repetier

[www.youtube.com]

Edited 1 time(s). Last edit at 01/26/2020 05:31AM by Charels.