Nozzle repeatedly clogging while printing Ninjaflex TPU December 22, 2020 11:37AM |
Registered: 3 years ago Posts: 6 |
Re: Nozzle repeatedly clogging while printing Ninjaflex TPU December 22, 2020 02:21PM |
Registered: 11 years ago Posts: 5,780 |
Re: Nozzle repeatedly clogging while printing Ninjaflex TPU December 23, 2020 03:18PM |
Registered: 3 years ago Posts: 6 |
Quote
the_digital_dentist
Reduce the drive gear pressure for flexible filaments and try printing in relatively thick layers. print slowly- maybe 30-40 mm/sec. If you have a 0.4 mm nozzle, print in 0.25 or 0.3 mm layers. Print at the upper end of the recommended range for the filament, too.
Re: Nozzle repeatedly clogging while printing Ninjaflex TPU December 23, 2020 03:34PM |
Registered: 11 years ago Posts: 5,780 |
Re: Nozzle repeatedly clogging while printing Ninjaflex TPU January 10, 2021 03:05PM |
Registered: 6 years ago Posts: 60 |